The drum mix asphalt plant mainly consists of cold aggregate supply system, burner, drying and mixing drum, dust collecting system, bitumen supply system, and electrical control system. It is a new type continuous asphalt mixing plant developed on the basis of international advanced technology by Handa. We always focus on upgrading our products to meet different requirements from valued customers at home and abroad. The hot mix plant can produce asphalt mixture continuously and has high combustion rate with low heat loss.
1. Ultra low fuel consumption and large output capacity under the same condition.
2. High precise measurement and control system, the whole plant working condition matching and coordination, high quality and reliability.
3. Do not need installation foundation(smooth and hard ground is enough).
4. Kinds of each material successive, can guarantee the continuity of mixing time and space, form flow line production.
5. Latest international weighing technology can guarantee the precision of materials, a revolutionary innovation compared with traditional continuous asphalt plant.
6. International classic control design philosophy and practice, easy to operate.
—Cold aggregate feeding system
1.Aggregate feeding is controlled by frequency invert
2.The side face of hoppers is equipped with fence to keep safety
—Drum Dryer and Burner
1.The drum dryer inclined angle: 3°
2.Burner: Oil burner
—Dust Filter System
1.Hot Finished Products Bin
—Middle screen and Inclined Belt
1.The Middle screen can take away the aggregates which size is over 25 mm
—Hot Finished Products Elevator
1.Elevator is vertical bucket elevator
2.Component: rack, plate chain lifting, hopper, tension device and shell
3.Function: take the mixture into finished goods hopper
—Control Room and Control System
1.Weighing control system
3.The Main electrical elements can be international brand or domestic brand
1.Capacity can be 30Ton or 40Ton bitumen tank which is suitable for transportation by sea
|Main Parameter||Rated Capacity (t/h)||40||60||80||120|
|Working Noise (dB)||≤70|
|Raw Material||Aggregate Size (mm)||≤25|
|Aggregate Gravity (kg/m3)||≥1600|
|Cold Feeder||Cold Bin (m3)||3X6||4X6.5||4X6.5||4X6.9|
|Feeding Belt Adjustment Mode||Variable Frequency Drive|
|Weighing System||Method||Belt Weigher|
|Drying System||Mixing Type||Continuous|
|Drying & Mixing Drum (mm)||Φ1200X6000||Φ1500X6500||Φ1600X9000||Φ1850X9000|
|Fuel||Diesel, Heavy Oil, Fuel Oil, Natural Gas, Coal|
|Hot Aggregate Temperature||≤160℃|
|Hot Asphalt Temperature||130~165℃ (±5℃)|
|Dust Collection System||Avail. Type||Cylone Collector/Volute Casing Collector, Baghouse Dust Collector/Water Scrubber|
|Bitumen Supply System||Bitumen Tank (m3)||1x30||2x30||2x30||3x30|
|Heating Method||Electrical Heating/Thermal Oil Heating|
|Weighing Method||Flow Weigher|
|Control System||Operation Mode||Full Auto/Manual|
|Covering Area||L x W (m)||30x16||33x20||35x25||40x25|