Container Type Asphalt Batching Plant
  • Container Asphalt Mixing Plant
  • Container Asphalt Mixing Plant
  • Container Asphalt Mixing Plant
  • Container Asphalt Mixing Plant

Warranty : 12months
Port : Qingdao port
Place of Origin : Zhengzhou

Features

Container type asphalt mixing plant adopts the most advanced modular design and production methods of the world, the equipment is built from standard containers, to provide users with a neat and compact mixing plant. The electronic control system adopts the touch screen control, the automation degree is high, in accordance with the requirements of national environmental protection, reduces the transportation, the relocation and the foundation cost, the equipment has high mobility, it is mainly applicable to the construction and maintenance of bridge, high-grade highways, airports, ports and municipal roads.


1. Modular design,fast to install, convenient to transit, reduce installation costs.

2. It adopts standard container design to reduce equipment transport costs.

3. Equipment foundation is simple, it does not need to install cement concrete foundation, saving the cost and time of the site.

4. Most parts within the container are not affected by bad weather, so that the service life of the main units and the parts are prolonged and the maintenance cost is saved.

5. Container design can avoid the theft and destruction of the field operations, security is good.

6. The whole production process is closed, which can reduce the heat loss in the circulation process, save energy, the internal dust is not leaked, less pollution, good environmental protection.


Components


 Cold Aggregate Feeding System

The belt feeder use frequency conversion speed control, speed adjust rang is wide, high working efficiency.

The conveyor belt use circular belt without joint, steady running and long performance life.

At the input port of feeding belt conveyor, there is one simple screen can avoid big material input which can enhance hot efficiency and make sure the drying drum, hot aggregate elevator and vibration screen work reliability.

 Drying System   

The blade geometry of the dryer has been optimized to deliver an exceptionally efficient drying and heating process with reduced energy consumption,improve heating efficiency 30% than conventional design; Because of High heating efficiency, drum surface temperature is relatively low, so the cooling time after operation is considerably shorted.

Fully insulated and clad aggregate dryer. Drive by electric motors and gear unit through polymer friction drive support rollers.

Diesel, heavy oil, gas, coal or multi-fuel burners.

 Burning system

Coal burner and oil burner are available, coal burner with low product cost, is only 1/3 of oil burner, is the ideal choice for customer. The oil burner can use heavy and light oil, has no need to change any component, the consumption is less than 6.5kg/t(finished product) under standard condition.

Adopt international standard components, with low maintenance cost.

 Vibrating screen

Improved vibration and amplitude to optimize impact on the available screen.

Wear-resistant charging system with uniform distribution of the particle mix.

Wide open doors for easy access and screen meshes are simple to replace, so the down time is reduced.

 Mixing system

Mixer are designed by 3D mixing design, with long arms, shortened shaft diameter and a bi-directional mixing blades array.

The discharging process has been completely redesigned, the discharge time is minimal.

The distance between blades and bottom of the mixer is also restrained to the optimal minimum.

 Dust Collecting System  

Gravity primary dust collector collecting and recycling bigger fine, saving consumption.

Bag house secondary dust filter control emission be lower than 20mg/Nm3, eco-friendly.

Adopt high voltage pulse cleaning technology, contributing to a lower bag wearing, longer lifespan and better dust removal performance.

 Bitumen supply system

Bitumen tank is sturdy and durable. Different sizes and capacity of bitumen tank can be provided according to the customers requirements. The bitumen tank is covered by rock wool insulation layer and galvanized sheet, which maximally decrease the heat loss.

Bitumen tank is heated by the heat conduction oil, which make sure the temperature of the bitumen.

 Control system

Adopt Germany SIEMENS electrical element, working stably even in harsh working environment.

Containerized control room, with heat insulation and sound insulation layer.

 

 asphalt plant       asplalt mixing plant


Specification

Model ELB1000 ELB1500 ELB2000
Main Parameters Capacity(t/h) 80 120 160
Total Power(kw) ≤242 ≤326 ≤413
Noise(dB) ≤70
Voltage 220V/380V-50HZ(Adjustable)
Cold Feeder Cold Bin(m³) 4*7 4*8 5*8
Belt Feeding Capacity(t/h) 90 130 175
Belt Width(mm) 500 600 650
Feeding Belt Adjustment Mode Frequency Invertor
Drying System Drying Capacity(t/h) 90 130 175
Dryer Drum Size(mm) Φ1600*6800 Φ1800*8000 Φ2200*8000
Drive Motor Power(kw) 4*7.5 4*11 4*15
Fuel Diesel, Heavy Oil, Fuel Oil, Coal, Nature Gas
Coal Burner Max Burning Amount(kg/h) 1300 1700 2500
Oil Burner Max Burning Amount(kg/h) 110-550 170-850 200-1000
Power(kw) 1120-6100 1900-9500 2250-11160
Dust Collecting System Primary Gravity Dust Collector Cyclone Dust Collector, Volute Casing Collector
Baghouse Dust Collector Filter Area(m²) 380 450 550
Filter Bag NOMEX (USA. DuPont)
Air Emissions ≤20mg/Nm³
Air Black Ringelmann
Blower(m³/min) 570 740 1130
Mixing Tower Hot Aggregate Elevator Type Chain Elevating
Capacity(t/h) 110 130 175
Vibrating Screen Screening Decks 4 4 4
Screening Area( m²) 14.7 24.2 24.2
Hot Storage Bin Quantity 4+1 4+1 4+1
Capacity( m³) 24 28.5 32.5
Mixer Mixer Capacity(kg) 1000 1500 2000
Type Double Axis Forcing Stirring Batch Mixer
Mixing Period(s) 45
Mixing Power(kw) 2*18.5 2*22 2*37
Weighing System Hot Aggregate:±0.5%; Bitumen: ±0.25%; Filler:±0.2%
Bitumen Supply System Heating Type Electric Heating/Hot Oil Heating System
Bitumen Pump Screw Pump Injection Type
Discharge Amount of Bitumen(L/min) 300 500 700
Bitumen Tank( m³) 30 2*30 3*30
Filler Supply System Filler Tank Optional
Screw conveyor Capacity(t/h) 15 20 24
Hot Mix Storage Silo Bottom Placed/Side Placed 40t/60t/80t, Optional
Pneumatic System Air Compressor Screw Air Compressor
Air Storage Tank 600L---2000L Optional
Control System   Fully Automatic Computer Control(IPC+PLC+MONITOR+LASER PRINTER+AIR CONDITIONER)

CONTACT US

Have questions? Call us
+86-371-65825868 WhatsApp:+86 18137858347
Send your mail
info@handa-machinery.com
Visit our company at
Longsheng Industrial Park,
Nanyang, Henan, China.
Contact us by messagesWe will respond you within 24 hours.
Please enter a valid email address.
*
*
Provide complete information so that we will contact you soonest.(optional)
*
Indicate detailed requirement , we will provide tailored solutions for you soonest
* Your information is confidential and we will not disclose to any third party or people
4000-676-878 info@handa-machinery.com Contact us