5311TFC intelligent fiber slurry paver, improved is mainly applied to treat the pavement diseases like friction resistance reduction, cracks and ruts for improving its performances of anti-slide and waterproofing, evenness and travelling comfort. This equipment can be widely used in construction of slurry seal, modified slurry seal, micro surfacing and fiber micro-surfacing.
5311TFC intelligent fiber slurry paver is to polymer modified asphalt emulsion, clean crushed aggregate, mineral fillers, fibers, water and necessary additives , by a certain percentage transported into a mixer，formed by the rapid mixing of emulsified asphalt slurry mixture into the paver box, by spiral dosing uniformly flat paving the road.
5311TFC intelligent fiber slurry paver is a special equipment in Slurry seal construction technology ,Micro-surfacing construction technology, Fiber Micro-surfacing construction technology. to meet the slurry seal short mixing time, forming speed, paving thickness thin, to achieve the construction of fast, low cost, wide application , saving energy etc.
Slurry Seal Construction Technology
That means a slurry seal of emulsified asphalt slurry seal with the appropriate graded stone chips and sand aggregate, emulsified asphalt as binder, adding a certain percentage of filler (cement, lime, fly ash, slag, etc.) , additives and water and other materials, through mixing uniformity of slurry mixture, and uniform thickness and width of paving as required in the pavement of asphalt surface treatment thin layer.
Micro-Surfacing Construction Technology
Micro-surfacing is the use of special equipment, the polymer modified asphalt emulsion, appropriately graded aggregate, filler (cement, lime, fly ash, slag, etc.), water and additives, after a reasonable proportion mix was stirred to form a uniform slurry mixture, and paving on the road quickly and evenly, lamellar structures open traffic within 1 to 2 hours after paving.
Fiber Micro-Surfacing Construction Technology
5311TFC intelligent fiber slurry paver is to polymer modified asphalt emulsion, clean crushed aggregate, mineral fillers, fibers, water and necessary additives , by a certain percentage to mix to slurry mixture , paving with a high slip resistance and durability of the thin layer structure and can open traffic soon.Its different from Micro-surfacing construction technology is grading (gap grading) and fiber to add.
Fiber in asphalt mixture of asphalt can effectively improve the gel structure to form a three-dimensional dispersion form, play a reinforcement effect, and make asphalt, slag, etc. in the asphalt mixture is uniformly dispersed, can effectively prevent the micelles and oil spillage. The advantage is to improve the road surface friction resistance, durability and resistance to fatigue, has a good absorption capacity, resistance to deformation, super waterproof, can effectively prevent cracks in the road surface reflection, greatly extend the pavement life. Adding fiber micro-surfacing pavement life can increase about 30%, about 50% reduction in the amount of rutting.
|Product Name||Fiber Slurry Paver||Fiber Slurry Paver||Slurry Paver||Slurry Paver|
|Emission Standard||Euro V||Euro V||Euro V||Euro V|
|Chassis Engine Power||276KW/375hp||276KW/375hp||228KW/310hp||228KW/310hp|
|Auxiliary Engine Power||119KW/160hp||119KW/160hp||119KW/160hp||73.6KW/100hp|
|Fiber Tank Addictive Amount||≤3.5kg/min||≤3.5kg/min||/||/|
|Fiber Tank Capacity||0.2m3||0.2m3||/||/|
|Mixer Discharging Volume||≤3.5t/min||≤3.5t/min||≤3.5t/min||≤3.5t/min|
|Spreader Box Width||2.5-4.3m||2.5-4.3m||2.5-4.3m||2.5-4.3m|
|Aggregates Hopper Volume||12m3||12m3||12m3||10m3|
|Emulsion Tank Volume||4m3||4m3||4m3||3.7m3|
|Water Tank Volume||4m3||4m3||4m3||3.7m3|
|Additive Tank Volume||400L||400L||400L||400L|
|Filler Tank Volume||2×0.5m3||2×0.4m3||2×0.5m3||2×0.5m3|